Constructing sustained-release herbicide formulations based on poly-3-hydroxybutyrate and natural materials as a degradable matrix.

BACKGROUND: The purpose of the present study was to develop ecofriendly herbicide formulations. Its main aim was to develop and investigate slow-release formulations of herbicides (metribuzin, tribenuron-methyl, and fenoxaprop-P-ethyl) of different structure, solubility, and specificity, which were loaded into a degradable matrix of poly-3-hydroxybutyrate (P(3HB)) blended with available natural materials (peat, clay, and wood flour). RESULTS: Differences in the structure and physicochemical properties of the formulations were studied depending on the type of the matrix. Herbicide release and accumulation in soil were associated with the solubility of the herbicide. Fourier-transform infrared spectroscopy showed that no chemical bonds were formed between the components in the experimental formulations. Degradation of the formulations in agro-transformed soil in laboratory conditions was chiefly influenced by the shape of the specimens (granules or pellets) while the effect of the type of filler (peat, clay, or wood flour) was insignificant. The use of granules enabled more rapid accumulation of the herbicides in soil: their peak concentrations were reached after 3 weeks of incubation while the concentrations of the herbicides released from the pellets were the highest after 5-7 weeks. Loading of the herbicides into the polymer matrix composed of the slowly degraded P(3HB) and natural materials enabled both sustained function of the formulations in soil (lasting between 1.5 and ≥3 months) and stable activity of the otherwise rapidly inactivated herbicides such as tribenuron-methyl and fenoxaprop-P-ethyl. CONCLUSION: The experimental herbicide formulations enabled slow release of the active ingredients to soil. © 2019 Society of Chemical Industry.

The effect of the chemical composition and structure of polymer films made from resorbable polyhydroxyalkanoates on blood cell response.

Four PHA types were synthesized in the culture of Cupriavidus eutrophus B-10646 under special conditions, poly(3­hydroxybutyrate) [P(3HB)] and of copolymers, which contained 3HB monomers and 4­hydroxybutyrate (4HB), 3­hydroxyvalerate (3HV), or 3­hydroxyhexanoate (3HHx). All copolymers had the Mw of about 550-670 kDa, and the homopolymer P(3HB) had a significantly higher Mw - 920 kDa. P(3HB­co­4HB) and P(3HB­co­3HHx) had the lowest Cx (42 and 49%) while P(3HB­co­3HV) and P(3HB) exhibited higher Cx values (76%). Polymer films were prepared from different PHAs. Electron microscopy showed differences in the surface microstructure of the films. Films prepared from the P(3HB) were more hydrophobic and the arithmetic mean surface roughness of 71-75 nm, than the copolymer films, which were hydrophilic (57-60°) and had considerably higher roughness (158-177 nm). Blood parameters (hemoglobin and hemolysis) and response of the cells (erythrocytes, platelets, and monocytes) were studied in experiments with blood directly contacting the surface of the films of PHAs with different compositions. Cultivation of blood cells on polymer films did not cause any adverse effects on adhesion and morphology of all cell types. Results of studying blood cell response suggested that the films made from low-crystallinity copolymers containing 4­hydroxybutyrate and 3­hydroxyhexanoate were the best for contact with blood.

Bio-functionalization of phytogenic Ag and ZnO nanobactericides onto cellulose films for bactericidal activity against multiple drug resistant pathogens.

The present study describes the synthesis of silver and zinc oxide nanobactericides from the phytogenic source Bupleurum aureum. The synthesized nanobactericides were characterized and evaluated for bio-functionalization onto bacterial cellulose membrane which was synthesized by Komagataeibacterxylinus B-12068 culture strain. The synthesis of nanobacterides were initially confirmed using UV-Visible spectroscopy which indicated localized surface resonance (LSPR) peaks at 415 nm for silver nanobactericides and 280 nm for zinc nanobactericides. The nature of the capping agent for synthesized nanobactericides was predicted using FTIR which confirmed the presence of functional moieties. XRD analysis revealed their crystalline nature while morphological characteristics were studied using TEM which confirmed the polydispersity of nanobactericides with the average size in the range of 20-25 nm. The nanobactericides were tested for their antimicrobial activity against seven multi-drug resistant pathogens which were clinically isolated from patients suffering from a myriad of microbial infections. The tested pathogens had antimicrobial resistance to ten different antibiotics and have been reported to be the major cause of nosocomial infections. The nanobactericides displayed significant activity against the test pathogens. Silver nanobactericides showed the highest activity against Escherichia coli strain 55 with a 24 mm zone of inhibition while zinc oxide nanobactericides displayed the highest activity against methicillin-resistant Staphylococcus aureus (MRSA) with a 20 mm inhibition zone. The bio- functionalized cellulose films (BCF) were characterized using SEM along with physicochemical analysis. The BCF's were evaluated for antibacterial activity against test pathogens which resulted in marked antimicrobial potential against multi-drug resistant bacteria and therefore has the potential to be utilized as an efficient alternative to counter drug resistant pathogens.

Efficacy of tebuconazole embedded in biodegradable poly-3-hydroxybutyrate to inhibit the development of Fusarium moniliforme in soil microecosystems.

BACKGROUND: An important line of research is the development of a new generation of formulations with targeted and controlled release of the pesticide, using matrices made from biodegradable materials. In this study, slow-release formulations of the fungicide tebuconazole (TEB) have been prepared by embedding it into the matrix of poly-3-hydroxybutyrate (P3HB) in the form of films, microgranules and pellets. RESULTS: The average rates of P3HB degradation were determined by the geometry of the formulation, reaching, for 63 days, 0.095-0.116, 0.081-0.083 and 0.030-0.055 mg day-1 for films, microgranules and pellets respectively. The fungicidal activity of P3HB/TEB against the plant pathogen Fusarium moniliforme was compared with that of the commercial formulation Raxil Ultra. A pronounced fungicidal effect of the experimental P3HB/TEB formulations was observed in 2-4 weeks after application, and it was retained for 8 weeks, without affecting significantly the development of soil aboriginal microflora. CONCLUSION: TEB release can be regulated by the process employed to fabricate the formulation and the fungicide loading, and the TEB accumulates in the soil gradually, as the polymer is degraded. The experimental forms of TEB embedded in the slowly degraded P3HB can be used as a basis for developing slow-release fungicide formulations. © 2016 Society of Chemical Industry.

Constructing herbicide metribuzin sustained-release formulations based on the natural polymer poly-3-hydroxybutyrate as a degradable matrix.

Polymer poly(3-hydroxybutyrate) [P(3HB)] has been used as a matrix in slow-release formulations of the herbicide metribuzin (MET). Physical P(3HB)/MET mixtures in the form of solutions, powders, and emulsions were used to construct different metribuzin formulations (films, granules, pellets, and microparticles). SEM, X-Ray, and DSC proved the stability of these formulations incubated in sterile water in vitro for long periods of time (up to 49 days). Metribuzin release from the polymer matrix has been also studied. By varying the shape of formulations (microparticles, granules, films, and pellets), we were able to control the release time of metribuzin, increasing or decreasing it.

An in vivo study of osteoplastic properties of resorbable poly-3-hydroxybutyrate in models of segmental osteotomy and chronic osteomyelitis.

A series of 3D implants and filling materials prepared from powdered biodegradable polymers, polyhydroxyalkanoates (PHAs), have been designed for the purposes of reparative osteogenesis. The 3D implants are made of resorbable polymer of hydroxybutyric acid (poly-3-hydroxybutyrate, P3HB) and a composite of this polymer with hydroxyapatite (HA) (P3HB/HA). The properties of the implants were studied in vivo in a model of segmental osteotomy and compared with commercial material Bio-Oss(®). All implants containing P3HB as the main component facilitate reconstructive osteogenesis. P3HB and P3HB/HA show pronounced osteoplastic properties; their in vivo degradation is slow and corresponds to the growth of a new bone tissue, facilitating normal reparative osteogenesis. Also, powdered P3HB and P3HB/tienam can be used as filling materials for osteoplasty of bone cavities infected by Staphylococcus aureus. Biodegradable 3D implants and P3HB-based filling materials show pronounced osteoplastic properties and degrade in vivo at a slow rate, enabling normal reparative osteogenesis.